I have lost my Original Windows DVD, how can I get an official replacement?
Microsoft provides official ISO images for downloading.
Is there a way to calibrate the connected extended Touch-Monitor to a extended Desktop?
Yes, if the connected Touch-Monitor is used by one driversoftware like the UPDD driver.
As example, the DK8 has allready installed the UPDD driver for the buildin touch.
If an USB-Touch will be connected and installed, it will be added automatically in the UPDD Console. Continue with point 5., otherwise it must be added manually like a serial touch.
1. Start UPDD Console under Start | UPDD | Settings
2. Press "Add a new device" Button, will be found in Hardware
3. Chosse controller type
4. Choose serial port and press "OK"
5. To calibrate both monitors click with right mouse button on the UPDD symbol and choose "Calibrate All" under "Calibrate"
6. Follow the instructions on monitor to calibrate both.
How can I get the my-t-touch keyboard on logon
To get the my-t-touch keyboard on logon, you have to start the My-t-Touch Logon Utilities and enable "Enable Onscreen Keyboard Logon".
The following screenshots show the way how to configure.
Attention: During the configuration security programs which control/block registry must be disabled, otherwise the settings won't be stored.
How do I remove existing touchscreen drivers?
Existing drivers, which are installed by setup, can be uninstalled by software managmenet. For this open start > control panel > add or remove programs. After that choose the driver you want to uninstall and click on remove button. In most cases it's recommended to restart the operating system after uninstalling drivers/software, because some files can only be deleted after restart.
Is it possibel to start an operating system from Network? How can I use RIS Software deployment?
We use different LAN cards on our Rocky series, so there are different ways to do:
RT586 -PXE Floppy Disk
RT686 -PXE Floppy Disk
RT686EX -PXE Floppy Disk
RT686EX-M3 -PXE Diskette
RT786EX -BIOS Boot order
RK786EX -BIOS Boot order
RK886EX -BIOS Boot order
DR686 -PXE Floppy Disk
DR786AC -BIOS Boot order
DR786EX -BIOS Boot order
DR786EX-L -BIOS Boot order
DR886EX -BIOS Boot order
- MT686EX -PXE Floppy Disk
If you are using a Microsoft Server System, there are tools delivered to create a PXE Floppy Disk.
I lost the password for my Windows operating system, can I restore this?
Usually it´s not possible to restore the admin password. When the enduser gets his new roda notebook he must key in the administrator password. Some tools can be found in the internet. But they are mostly not legal. Using such tools may destroy data on the harddisk.
As soon as Windows has been started the local display is getting dark.
With the hotkey CTRL+ALT+F1 the signal is switched to the external analog monitor. This is also possible when no monitor is connected.
With the hotkey CTRL+ALT+F3 you can switch back to the local monitor of your notebook. To do so, windows has to be started and the user has to be logged on. The hotkeys can be changed or disabled in the grafics properties of the intel grafics driver.
To enter the grafics properties press CTRL+ALT+F12 or press the right mouse button on desktop -> grafics properties... -> hotkeys.