26 Apr 2017

I have lost my Original Windows DVD, how can I get an official replacement?


Microsoft provides official ISO images for downloading.

Windows 7: https://www.microsoft.com/de-de/software-download/windows7

Windows 8.1: https://www.microsoft.com/de-de/software-download/windows8

Windows 10: https://www.microsoft.com/de-de/software-download/windows10

03 Mar 2015

My storage PC-Card is not detected correct


Due to the modern design of the BIOS, it can happen that legacy storage devices are not properly detected or claim to get not enough free memory. This appears often in combination with Windows Error code 12.

Can be cause by PCMCIA Storage cards, CF-Cards with PC-Card Adapter or Multi-Card Readers that can read SD card and several other card formats.

To solve this for Rocky RK10/ RF10 just follow these few easy steps:

  1. Power On and pass F2 into BIOS setting.
  2. Select Chipset -> PCH-IO Configuration
  3. PCI Express Configuration -> PCI Express Port 8
  4. A. PME SCI set to Disable
    B. Extra Bus Reserved set to “7”
    C. Reserved Memory set to “20”
    D. Reserved IO set to “20”

 

To solve this for Panther DR10/ DK10 /DT10 just follow these few easy steps:

  1. Power On and pass F2 into BIOS setting.
  2. Select Chipset -> PCH-IO Configuration
  3. PCI Express Configuration -> PCI Express Port 5
  4. A. PME SCI keep Enabled
    B. Extra Bus Reserved set to “0”
    C. Reserved Memory set to “20”
    D. Reserved IO set to “20”
04 Feb 2015

After BIOS-Update the display is blurred, what can I do to solve this problem?


Please change these BIOS-Settings:

Chipset > System Agent (SA) Configuration > Graphics Configuration > LCD Control > change Panel Type.

 

If the headlines in the BIOS are not visible please use following key sequence to change the Panel-Type.

F2 (if you are not in the BIOS) > key right > key right > enter > enter > enter > enter > key down > enter > key F4 

04 Feb 2015

Some keys are swaped on my keyboard - What can I do?


Please download the "roda update key installer" and make an update on the affected model.

Service & Support => Downloads => Notebooks => affected model => BIOS => roda-update-key-installer 2.6.3

Note: Please use roda update key installer 2.6.3 or higher.

If the display is blurred after BIOS-Update please follow FAQ click.

 

 

20 Nov 2014

I have lost my Original Windows 8 DVD, how can I get an official replacement?


Please follow official Microsoft guide:

http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media

24 Feb 2014

How long can I store my computer without loosing CMOS data?


The RTC battery is charged as soon as there is any powersupply like AC-Adapter or Vehicleadapter

  • The RTC Battery can run ~4000h a bit less than half a year.
  • It takes ~50h to fully recharge the RTC battery, because there is only a very small charging current possible.
  • If the RTC Battery is empty, the CMOS default settings are loaded. Alle BIOS settings, date & time and Passwords need to be set.
05 Oct 2011

Recommended Power Settings for Windows 7


ProzessorenergieverwaltungZeitgeber zur Aktivierung zulassen

By default, Win7 does not allow the CPU to step down when using an external power supply.

The advantage of stepping down is not only that the CPU has a lower power consumption but that the computer case does not heat up so much and stays cool.

To allow CPU step down you do the following:

  1. Open the control panel and click on "Hardware and Sound".
  2. Go to "Power Options" and click on "Change battery settings".
  3. After that click for the selected power plan on "Change plan settings".
  4. Go further to "Change advances power settings".
  5. In the just opened window "Power Options", you are able to set the minimum processor state in percent under "Processor power management" > "Minimum processor state" > "Plugged in". It's recommended to use the same settings as for battery usage.


Besides the settings for CPU step down you can change the wake timers for the standby modes. The advantage is, that applications are able to wake up the system automatically from standby mode.

To enable the wake timers you follow the points 1 to 4. After that the wake timers can be enabled under "Sleep" > "Allow wake timers".

Files:
roda_pwrscheme_advanced.pow12.0 K
Displaying results 1 to 7 out of 12
<< First < Previous 1-7 8-12 Next > Last >>