military grade AC/DC power supply series AC150

AC150 - 150W MIL AC/DC Power Supply
AC/DC power supply AC150

The series AC150 power supply have a rugged, powder coated aluminum housing and is dust, vibration and water resistant. Highlights of this 150 Watt AC/DC adapter is the unique combination of military grade and protection class II (optional I), best EMI properties (optional MIL-STD 461 and Tempest Zone 1) and the wide frequency range up to 400Hz for usage in aviation applications.

 

Developed for the usage with rodas Laptop-Server Lizard RW11 it can be used also with various different devices (non-roda products) and as battery charger with or without MIL DC-IN plug. Combined with non-flammable cables the AC/DC power supply is best suitable for aviation missions. Other plugs on request.

 

Features

 

  • Input voltage: 115Vac @60Hz/400Hz and 230Vac @50Hz/60Hz
  • Output voltage: 19Vdc/150W (7,9A), other voltages on request
  • active PFC
  • class I or class II equipment
  • output short-circuit protection and current limiting
  • Operating Temperature: -20°C - + 60°C
  • Storage temperature: -40 - +85°C
  • Weight: approx. 0,7 kg
  • Dimension: 160 x 85 x 45 mm (without cable)
  • Efficiency: typical >84-90% (depending on type)
  • Transient protection
  • Protected against possible damage due to output over- or under-voltage
  • IP65 according to DIN EN 60529 (dust and water)
  • EMC-Conformity according to EN 61000-3-2:2014
  • MIL-STD 810G, MIL-STD461F, VG 95373 (design to meet) 

 

Additional Certifications (as option)

 

  • IP65 according to DIN EN 60529 (dust and water)
  • VG 95332 (grit and dust)
  • MIL-STD 810G method 505.5 (procedure I) (solar radiation)
  • MIL-STD 810G method 508.6 (mold infestation)
  • Surge and lightning protection for 24 VDC system of MIL-STD 1275
  • EMV VG 95373 and MIL-STD 461F (Ground Army)
  • Tempest Zone 1/SDIP 27 Level B (ER)

General

General

Protection class 

I or II  (no protective earth) 

Safety

EN 60950

CE-Conformity

Manufacturers declaration


Directive related to Low Voltage

Transient protection

EN 61004-4


EN 61004-5

EMI 

Designed to meet: 


MIL-STD 461E  (Ground Army)

ESD

EN610000-4-2

Resistance 

Short circuit proof to short circuit

Cooling

Convection cooling

LED indicators

Output: 1 LED green

Input Variables

Input Variables

Input voltage

115VAC (60 Hz), 115VAC (400 Hz),

Frequency

230VAC  (50/60Hz)

Input current

typical 1.6 A (115 V)


typical 0.8 A (230 V)

Fuse

intern

Isolation

> 10MOhm


input-output: 4300 VDC


input-chassis: 4300 VDC

Efficiency

typical > 83 %

Connections (cables)

power cord 


(w/o protective conductor)

Cable length

1.5 m

Output Variables

Output Variables

Output voltage

1 output (see previous page) 


others upon request

UA-tolerance

+/-2 % typical (Ue+Ia +Tu)

Output power

150 Watt


-20°C to +60°C (with Derating)

Base load

No base load needed


(switches during idle state)

Residual ripple

100 mV

(DIN61204)

(an 50 Ohm bis 20 MHz)

Current limit

typical 105-135% of nominal

Connections (cables)

Connector: 62IN-16F-10-2S-62 or 62GB-16F-10-2S

Cable length

1.5 m

Mechanics

Mechanics

Housing

Aluminum / 


RAL9021 black


Other colours upon request

Ingress Protection

IP54 (optional IP65 )

Dimensions

210 x 130 x 50 mm (w/o cable)

Weight

ca. 1.5 kg

Downloads

Downloads